(SOLD OUT) OZtrail Breezeway 4V Dome Tent

NEW! Oztrail Breezeway 4V

Featuring Breezeway – All Weather Ventilation

 

OZTRAIL BREEZEWAY 4V TENT

• Dimensions: 240cm long x 220cm wide x 185cm high at centre of tent

• Packed size: 67cm x 22cm x 22cm approx

• Weight: 9kgs

• Oztrail’s Breezeway design creates more headroom & shoulder space inside the tent
• Tri-brace cross pole frame provides quick setup, greater strength & improved water shedding
• Anti-Sheer DuraPlus Black Series shock corded fibreglass poles for greater strength and easy assembly
• Non-corrosive stainless steel pole joiners for long term reliability
• Strength and near vertical side walls result from powder coated steel Portico front poles
• Silver coated UVtex Sun Tough fly fabric with water repellent treatment
• Heat taped fly seams provide a complete water shield
• Heay-Duty PE bucket floor creates elevated floor seams
• Quick-Clip system for easy assembly
• Total insect protection with fine no-see-um mesh
• Large Breezeway size windows with walk through function
• Rear awning and poles for added shade protection
• Power cord access port, light attachment point
• Carry Bag

 

Additional Features:

Silver Coated UVTex® Fly
A 100% polyester waterproof fabric, enhanced by a UVTex® treatment, and silver coated for extra strength and protection.

DrySeam™
Factory tape sealed seams keep your tent weatherproof by preventing seam leakage.

PosiBrace™ (Not visible in picture)
Securely fasten your fly to the tent with these Velcro™ attachment points.

DryFloor™
A heavy duty PE floor with a bucket design for extra waterproofness at ground level.

No-See-Um Mesh
A high quality fine mesh panel that provides complete insect protection.

Polyester Inner
A 100% polyester fabric that keeps you cool and dry in hot or humid conditions.

DuraPlus Fibreglass Black Series Poles (Not visible in picture)
A high quality fibreglass pole, the anti-shear Black Series offer greater strength and easy assembly.

Stainless Steel Pole Joiners (Not visible in picture)
Ensuring the reliability and longevity of your tent poles.

Portico™ Poles
Steel poles that create near vertical walls, high ceilings and increase the strength of the tent.

Awning Poles
Convert a door or window into an awning for extra shade around your tent.

Tentsile Tab™ (Not visible in picture)
A clever triangular bracing pole attachment to hold the poles firmly in position during periods of high wind.

Tentsile Loop™
Shock absorbent reinforced peg down and guy rope points for greater stability and longer life.

DryGuard™ Plus
Windows are protected from wind driven rain with double flaps that Velcro™ together.

Easy Step D Doors (Not visible in picture)
A generously sized door with lower door sills to prevent tripping.

DuoDoor™ (Not visible in picture)
A door with mesh and fabric zippered panels allowing single zip effortless access.

FlowAway™ (Not visible in picture)
A tension strap system that eliminates the ponding of water in awnings.

But wait, there’s more:
The OZtrail Classic Breezeway 4V offers standing room and a full vestibule that will provide your small family a comfortable camping experience.

• 2 x entry doorways
• Power cord access port
• Lantern loop and J hook
• OZtrail Breezeway ventilation control

---

Owners Manual for Breezeway 4V Dome Tent from OZtrail

This guide includes product and parts, assembly instructions, figures and illustrations, disassembly instructions, folding instructions, tent warranty, important safety and care information, prolonging the life of your tent/shelter, understanding waterproofness, replacing shock-cord in tent poles, and zips.

---

Product Videos

---

Ask a Question about this Product

Ask a question

---

Warranty for OZtrail tents

OZtrail tents are warranted for a period of two years from date of purchase. The manufacturer agrees during the warranty period to repair any manufacturing defects in the product or, at its option, replace the product with another product or an equivalent product without cost to the owner for material or labour.

This warranty is subject to the original proof of purchase and the products being used in accordance with the instruction manual.

Important: This tent is to be assembled once before going camping to ensure that all parts are present and to become familiar with the assembly of the tent.

This warranty does not cover defects due to modification, accident, damage caused by vandalism, rusting, acts of nature or any other event beyond the control of the manufacturer. Nor does this warranty cover scratching, scuffing, natural breakdown of materials that occur inevitably with extended use including Ultra Violet light damage and exhausted zippers or other cosmetic damage that may result from normal wear and tear. In addition, defects resulting from intentional damage, negligence or unreasonable use will void this warranty.

If the product is defective within the terms of this warranty, OZtrail will repair or replace defective parts at no cost to the purchaser. Please note the shipping charges to and from the OZtrail warehouse or original place of purchase are not covered under warranty and are the responsibility of the purchaser. OZtrail reserves the right to make substitutions to warranty claims if parts are unavailable or obsolete.

Your product is valuable and should be insured against loss or damage. During strong winds and storms collapse the tent flat onto the ground and seek refuge in your vehicle. Damage caused by storms and strong winds is not covered by warranty.

This warranty does not cover incidental expenses including property damage.

---

What is not covered by your warranty

OZtrail tents use waterproof and water repellent fabrics. However, with the addition of seams, zips and other desirable features a recreational tent will not be as waterproof as a car, house or other solid structures.

The following are common examples of how water can enter a tent:

Condensation – When warm moist air meets cooler air, condensation occurs. The tent/shelter fly forms an impermeable layer between the inside and outside conditions. The moisture inside the tent/shelter condenses on the fabric. Sometimes in cold conditions it appears that the fabric is leaking when in fact the cause is condensation. Condensation can be reduced if the tent/shelter is well ventilated.

Zips – All care is taken in the design to cover zips with rain flaps. At times wind driven rain could force water under the rain flaps and through the zips. To minimise this, make sure all doors and windows are closed with the rain flaps covering the zips.

Floor – If the ground is very wet or water pools under the floor, downward pressure of standing or kneeling on the floor could force water through the floor fabric. To prevent this, do not pitch the tent over hollows and make sure water drains away from the tent.

Structural Integrity – A perfectly pitched tent on perfectly flat ground is structurally strong and most waterproof. During prolonged periods of rain and wind it may be necessary to tighten guy lines and reset the tent pegs and attend to drainage around the tent. Sagging and incorrect pitching weakens the tent structure and could allow water to pool on the fly placing undue forces on the tent causing leaking and breakages.